|
Item no.: |
276... | Hardness: | Shaft: | Material HSS HRC 64 ± 2 |
| The 4th digit of the item no. | Material CPM 10 V HRC 62 ± 2 | |||
| indicates the material | ||||
| How to order | Head: | Material HSS | ||
|
Version: |
Hardened, tempered, shaft fine ground | and CPM 10 V HRC 50 ± 5 | ||
| finished, head hot forged and annealed | ||||
| with thickening under head. | How to order: | For bottle-neck punch | ||
| type DA | ||||
| Material: | HSS = High speed steel | Diameter d1 = 5,0 mm | ||
| CPM 10V = High performance powdered steel | Total lenght l1 = 80 mm | |||
| From high speed steel (HSS): | ||||
|
|
For other materials see from (Material Table) | |||
| Bottle-neck punch | ||||
| DA-HSS 5,0 × 80 | ||||
| Item no..: 2763.05.080 | ||||
| d1 | Gradation | l1 | d2 | k | a | d3 | r | d1 | Gradation | l1 | d2 | k | a | d3 | r | |
| d1 | + 0,5 | 0 | 0 | d1 | + 0,5 | 0 | 0 | |||||||||
| h6 | 0 | - 0,2 | + 0,2 | - 0,2 | h6 | 0 | - 0,2 | + 0,2 | - 0,2 | |||||||
| ab 2,0 | 0,1 |
71/ 80/ 100 |
3,0 | 3,0 | 1,0 |
d1 ± 0,1 |
3,5 | ab 7,5 | 0,1 |
71/ 80/ 100
|
11,0 | 4,0 | 1,5 |
d1 ± 0,2
|
12,0 | |
| ab 2,1 | 3,2 | ab 8,5 | 13,0 | 15,0 | ||||||||||||
| ab 2,3 | 3,5 | 5,0 | ab 9,5 | 14,0 | ||||||||||||
| ab 2,6 | 4,0 | 6,5 | ab 10,5 | 0,5 | 15,0 | |||||||||||
| ab 3,0 | 4,5 | ab 11,5 | 16,0 | |||||||||||||
| ab 3,5 | 5,0 | 8,0 | ab 12,5 | 17,0 | ||||||||||||
| ab 4,0 | 5,5 | 4,0 | 1,5 | ab 13,5 | 18,0 | |||||||||||
| ab 4,5 | 6,0 | ab 14,5 | 19,0 | |||||||||||||
| ab 5,0 | 7,0 | 10,0 | ab 15,5 | 20,0 | ||||||||||||
| ab 5,5 | 8,0 | ab 16,5 | 21,0 | |||||||||||||
| ab 6,0 | 9,0 | ab 17,5 | 22,0 | |||||||||||||
| ab 6,5 | 10,0 | 12,0 | ab 18,5 | 23,0 | ||||||||||||
| 19,5-20,0 | 25,0 |
