Ejector pin with cylindrical head

rectangular stepped shaff blade ejector to DIN ISO 8693

(DIN 1530 standard part 4, type FAH, hardened)

return

Item no.:

6321 . . . Hardness: Shaft: HRC 60 2
 

 

     
Version: Head hot forged, hardened shaft, tempered   Head: HRC 45 5
  and fine ground finished,      
  Particularly suitable for pressure die cast tools. How to order: For hardened blade ejector pin with

 

    cylindrical head
      Shaft diameter d3 = 8 mm
Material: WS = Tool steel of type   Stepped to          a = 2 mm
  1.2067 or similar                                 b = 7,5 mm
  Temper resistance at least 200 C   Total length         l1 = 200 mm:
     

 

      Blade ejector pin FAH 2 x 7.5 x 8 x 200
       Item no. 6321.2.075.200

* These limit values apply for 100 mm lengths. For lengths> 100 the limit values are to be multiplied by (11-12) 10- 2
The tolerance value reaches its maximum at the second level.
 


a b d3 d2 d4 k r1 r2 l1 + 2/0 l3
0 0 h11 0 ca. 0 + 0,2 min 63 80 100 125 160 200 250 315 400
-0,015 -0,15   - 0,2   - 0,05 0   l1 - 1/ - 2  
* * 32 40 50 63 80 100 125 160 200 ca.
1,0 3,5 4,2 8 d3+0,03 3 0,3 10 5
0,8 3,8
1,0
1,2
1,0 4,5 5 10
1,2
1,5
1,0 5,5 6 12 5 0,5 6
1,2
1,5
2,0
1,2 7,5 8 14 8
1,5
2,0
1,5 9,5 10 16 d3+0,04 10
2,0
2,0 11,5 12 18 7 0,8 12
2,5

= Available from stock or within short period. Other dimensions on request.

Note: The allocation of measurements ad3 wer changed to 14,2 in accordance with DIN 1530 standard.

If you request at a = 1 measurement d3 = 4,0, please indicate this clearly on your order.